Applied-motion STAC6-C Manual do Utilizador descarregar pdf (Página 57)

STAC6 Hardware manual

920-0029 Rev. C

5/2/2012

Alarm Codes

In the event of an error, the green LED on the main board will ash one or two times, followed by a series of

red ashes. The pattern repeats until the alarm is cleared.

Applied Motion Products, Inc.

404 Westridge Drive Watsonville, CA 95076

Tel (831) 761-6555 (800) 525-1609 Fax (831) 761-6544

www.appliedmotionproducts.com

Code Error

solid green no alarm, motor disabled

flashing green no alarm, motor enabled

1 red, 1 green motor stall (optional encoder only)

1 red, 2 green move attempted while drive disabled

1 red, 3 green subroutine stack overflow (Si only)

2 red, 1 green ccw limit

2 red, 2 green cw limit

2 red, 3 green subroutine stack underflow (Si only)

3 red, 1 green drive overheating

3 red, 2 green internal voltage out of range

3 red, 3 green blank Q segment

4 red, 1 green power supply overvoltage

4 red, 2 green power supply undervoltage

4 red, 3 green bad instruction in Si program

5 red, 1 green over current / short circuit

5 red, 2 green motor resistance out of range

6 red, 1 green open motor winding

6 red, 2 green bad encoder signal (optional encoder only)

7 red, 1 green serial communication error

7 red, 2 green flash memory error

8 red, 1 green internal voltage out of range

1 2 ... 52 53 54 55 56 57

Sem comentários

Applied-motion STAC6-C Manual do Utilizador Página 57