Applied-motion ST10-C-CE Manual do Utilizador descarregar pdf (Página 49)

ST5/10-Si,-Q,-C, IP Hardware manual

920-0004 Rev. F

6/10/14

Mechanical Outline

Mounting the Drive

You can mount your drive on the wide or the narrow side of the chassis using #6 screws. If possible, the

drive should be securely fastened to a smooth, at metal surface that will help conduct heat away from the

chassis. If this is not possible, then forced airow from a fan may be required to prevent the drive from

overheating.

• Never use your drive in a space where there is no air ﬂow or where other devices cause

the surrounding air to be more than 40°C.

• Never put the drive where it can get wet or where metal or other electrically conductive

particles can get on the circuitry.

• Always provide air ﬂow around the drive. When mouting multiple ST drives near each

other, maintain at least one half inch of space between drives.

3.0

1.775

5.0

6X SLOT 0.16

WIDE, FULL R

0.663

1.98

0.61

4.74

1 2 ... 44 45 46 47 48 49 50 51 52

Sem comentários

Applied-motion ST10-C-CE Manual do Utilizador Página 49