Applied-motion TSM17Q-1AG Manual do Utilizador descarregar pdf (Página 28)

Rev. A

920-0084

TSM17S/Q Hardware Manual

Some SCL commands transfer data to the drive for immediate or later use. These data values

are stored in data registers and remain there until new commands change the values or power

is removed from the drive. Some data registers in a drive are Read-Only and contain predened

information about the drive which can also be read through SCL commands.

Because of the intense nature of serial communications required in host mode applications,

there is a serial communication Protocol (PR) command available that will adjust a drive’s

serial communications protocol to best t an application. Typically this command is used when

conguring a drive and saved as part of the startup parameters. But it can be used at any time to

dynamically alter the serial communications.

The Host Command Reference contains the complete command listing as well as instructions on

connecting and conguring the TSM23S/Q for use in SCL mode, using the Data Registers and

the Protocol command. It also contains detailed information on:

• Host Serial Communications

• Host Serial Connections

• Alarm and Status Codes

• Working with Inputs and Outputs

The Host Command Reference is available from the Applied Motion Products website at http://

www.applied-motion.com

under the SCL Utility download section.

1 2 ... 23 24 25 26 27 28 29

Sem comentários

Applied-motion TSM17Q-1AG Manual do Utilizador Página 28