Applied-motion TXM24IP-1EG Manual do Utilizador descarregar pdf (Página 6)

Rev. C

920-0089

TXM24 Ethernet Hardware Manual

2 Getting Started

The following items are needed:

• a 12 - 70 volt DC power supply, see the section below entitled “Choosing a Power Supply” for

help in choosing the right one

• a PC running Microsoft Windows XP, Vista, or Windows 7 or 8

2.1 Installing Software

Before utilizing the TXM24 Integrated Step-Servo Motor and Step-Servo Quick Tuner Software in

an application, the following steps are necessary:

• Download and install the Step-Servo Quick Tuner software from Applied Motion Products

website.

• Connect the drive to the PC using the Ethernet communication cable.

• Connect the drive to the power supply. See instructions below.

• Launch the software by clicking Start...Programs...Applied Motion Products...Step-Servo Quick

Tuner

• Apply power to the drive.

2.2 Mounting the Hardware

As with any step motor, the TXM24 must be mounted so as to provide maximum heat sinking and

airow. Keep enough space around the Integrated Motor to allow for airow.

• Never use the drive where there is no airow or where other devices cause

the surrounding air to be more than 40°C (104°F).

• Never put the drive where it can get wet.

• Never use the drive where metal or other electrically conductive particles can

inltrate the drive.

• Always provide airow around the drive.

1 2 3 4 5 6 7 8 9 10 11 ... 25 26

Sem comentários

Applied-motion TXM24IP-1EG Manual do Utilizador Página 6