Applied-motion BLuDC4-Q Manual do Utilizador descarregar pdf (Página 5)

BLuDC-S,-Q Hardware manualBLuDC-S,-Q Hardware manual

BLuDC-S,-Q Hardware manual

Getting Started

This manual describes the use of four different drive models. What you need to know and what you

must have depends on the drive model. For all models, you’ll need the following:

• a 24-48 volt DC power supply for the motor. Please read the section entitled

Choosing a Power Supply

for help in choosing the right power supply.

• a compatible servo motor

• cables to connect the motor to the drive. If you are using an Applied Motion

A, N or M series motor, use BLUENC and BLuMTR cables (one of each).

• a small flat blade screwdriver for tightening the connectors (included).

• a personal computer running Microsoft Windows 98, 2000, NT, Me or XP.

• The Applied Motion CD (included)

• An Applied Motion programming cable (included)

If you’ve never used a BLU serIf you’ve never used a BLU ser

If you’ve never used a BLU ser

vo beforevo before

vo before

, you’ll need to get familiar with the drive and the set up

software before you try to deploy the system in your application. We strongly recommend the

following:

1. Install the

Quick Tuner

software from the CD.

2. Launch the software by clicking Start...Programs...Applied Motion..Quick Tuner.

3. Connect the drive to your PC using the programming cable.

4. Connect the drive to the power supply.

5. Connect the drive to the motor.

6. Apply power to the drive.

7. Follow the instructions in the

Quick Tuner

manual.

The connectors and other points of interest are illustrated on pages 6 and 7. Depending on your

drive model and application, you’ll need to make connections to various parts of the drive. These

are detailed later in the manual.

1 2 3 4 5 6 7 8 9 10 ... 31 32

Sem comentários

Applied-motion BLuDC4-Q Manual do Utilizador Página 5