Applied-motion STR4 Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Hardware Applied-motion STR4. Applied Motion STR4 User Manual Manual do Utilizador

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 2
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 0
STR4/8 Quick Setup Guide
Requirements
To begin, make sure you have the following equipment:
A compatible stepper motor.
A small at blade screwdriver for tightening the connectors (included).
A suitable DC power supply. AMP recommends the PS150A24 or PS320A48 available from Applied Motion.
Step 1 - wiring the DC supply
Step 2 - wiring the motor
920-0031 A
Connect the drive to the motor. Four lead motors can be connected in only one way, as shown in Figure 1.
We recommend that eight lead motors be connected in parallel, as shown in Figure 2.
If using a non-Applied Motion Products motor, please refer to your motor specs for wiring information.
red
blue
yellow
white
A+ A- B+ B-
orange+blk/wht
black+org/wht
red+yel/wht
yellow+red/wht
A+ A- B+ B-
Figure 1 Figure 2
Wiring the Drive
a. Wire the drive to the DC power source.
(do not apply power until all connections to the drive have been made)
Note, the STR4 accepts DC voltages from 24-48V, while the STR8 accepts
DC voltages from 24-75V.
b. Ensure a proper earth ground connection by using the screw on the
left side of the chassis.
If using an external fuse, we recommend the following in-line with the V+ connection :
STR4: 3AG, 4 amp (Littlefuse 313004P)
STR8: 3AG, 6.25 amp (Littlefuse 3136.25P)
*See the
STR Hardware Manual for more information about
power supply and fuse selection.
Motor & Power Supply
Connector
Run Current, Idle Current
Steps/rev, Inertia, Self Test
Input & Output
Signals
Motor Selector
Status LEDs
Layout of the front panel of the STR drive.
Vista de página 0
1 2

Resumo do Conteúdo

Página 1 - STR4/8 Quick Setup Guide

STR4/8 Quick Setup GuideRequirementsTo begin, make sure you have the following equipment: ▪ A compatible stepper motor. ▪ A small at blade screwdrive

Página 2 - Setting up the Drive

If you have any questions or comments, please call Applied Motion Products Customer Support: (800) 525-1609, or visit us online at www.applied-motion.

Modelos relacionados STR8

Comentários a estes Manuais

Sem comentários